Skip global navigation and go to header navigation

Skip global navigation and read the article

Skip global navigation and go to local navigation

Skip global navigation and go to footer navigation



TOP >  Installed Equipment and Facilities >  Pure Water/Ultrapure Water Production Equipment

Pure Water/Ultrapure Water Production Equipment



Pure Water/Ultrapure Water Production Equipment

Model
(Manufacturer)
Elix5/Milli-QA10 (Millipore)
Features and Specifications, etc. [Overview]
 This equipment can produce ultrapure water with inorganic ions, organic matter, particles, and microorganisms removed to the extreme.

[Specifications]
 Milli-QA10Academic
 - Water sampling rate: 1.2L/min. (automatic sampling)
 - Specific resistance: 18.0 MΩ (25°C)
 - TOC: <20 ppb
 - Quantum Cartridge
 - Q-Gard Cartridge
 - Final filter express millipack (0.22μm)
 UV lamp for A10TOC meter
 - UV lamps for sterilization (in water storage tank)
 Elix5
 - Water sampling rate: 5L/hour
 - Elix water quality: >3MΩcm
 - Progard pre-filter
 - RO membrane (reverse osmosis)
 Activated carbon pre-filter
 30L tank
 - Tank air vent filter
 - ASMUV lamp

[Features]
 - Standard equipment for deionized water production equipment.
Location Central Research Center (Room 317, University Building 1)
Remarks - New users should contact the Cell Function Analysis Laboratory (ext. 2570) .
Equipment Manager
Extension Number
Tezuka (Cell Function Analysis Laboratory)
2570
Usage Fee -
Equipment Photo

Pure Water/Ultrapure Water Production Equipment

Model
(Manufacturer)
Elix Advantage 5/MilliQ Advantage A10 (Merck)
Features and Specifications, etc. Equipment for producing pure water and ultrapure water

【Specifications】
Elix Advantage 5 (pure water generator)
- Production capacity: 5 L/h
- Water sampling rate (E-POD): 2 L/min (max.)
- Purity (EDI produced water) specific resistance: 5 MΩ-cm or higher
- Removal method: Pre-filter + activated carbon + RO + EDI module + 254 nm UV
- Tank: 100 L (70% is displayed as 100% at 70 L)
Green Basket already implemented (December 8, 2020)

MilliQ Advantage A10
- Water sampling rate (Q-POD) : 2 L/min (max.)
- Purity - Specific resistance: 18 MΩ-cm min.
    TOC: less than 20 ppb
Green Basket already implemented (June 29, 2021)

Location Laboratory for Proteins and Genes (Room 415, University Building 1)
Remarks
・Please check the remaining amount of water in the tank before sampling.(100% display at 70 L)

 If less than 20%, please refrain from large volume water sampling.

- When using the equipment, please be sure to fill out the logbook provided with it.
Equipment Manager
Extension Number
Tsukamoto (Laboratory for Proteins and Genes)
9928
Usage Fee -
Equipment Photo

Pure Water Production Equipment

Model
(Manufacturer)
Elix3 (Merck Ltd.)
Features and Specifications, etc. Pure water system with RO (reverse osmosis) membrane + long-life EDI (continuous ion exchange) .

【Specifications】
- Water sampling rate: 3 L/hour
- Purity: 3 MΩ-cm or higher
Location Bioimaging Analysis Laboratory(Pathology Specimen Preparation Room, Room 114, University Building 1)
Remarks - When using the equipment, please be sure to fill out the logbook provided with it.
Equipment Manager
Extension Number
Tominaga (Bioimaging Analysis Laboratory)
2320
Usage Fee -
Equipment Photo

Pure Water Production Equipment

Model
(Manufacturer)
Elix UV 5 (Millipore)
Features and Specifications, etc. Elix water production equipment purified by RO membranes (reverse osmosis)


【Specifications】
Purity (water quality): 3MΩ-cm min.
Water sampling rate: 5L/hour
Water supply: 28L/hour
Electrical conductivity: 80 μS/cm min. and 1000 μS/cm max.
Location 3rd floor corridor, University Building 1
Remarks -
Equipment Manager
Extension Number
Omics Analysis Laboratory
9814
Usage Fee -
Equipment Photo